KINGSTON KVR26N19S6/4 2666MHZ DDR4 NON-ECC CL19 288-PIN DIMM RAM – 4GB

Description

Buy Kingston KVR26N19S6/4 2666MHz DDR4 Non-ECC CL19 288-Pin DIMM Ram – 4GB online at Low Price. Buy complete range of RAMs on Edeelo.com, We Offer home delivery all over Pakistan.
Kingston KVR26N19S6/4 2666MHz DDR4 Non-ECC CL19 288-Pin DIMM Ram – 4GB

This document describes ValueRAM’s KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES & SPECS

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.23” (31.25mm)
RoHS Compliant and Halogen-Free
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. Edeelo cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.