No products in the cart.
KINGSTON KVR16N11S8/4 1600 MHZ DIMM 240-PIN DDR3 NON-ECC RAM – 4GB
- SKU: KVR16N11S8/4
Out Of Stock
Roll over image to zoom in
Click to open expanded view
Out of stock
ValueRAM’s 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA componen ts. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Buy Kingston KVR16N11S8/4 1600 MHz DIMM 240-Pin DDR3 Non-ECC RAM – 4GB online at Low Price. Buy complete range of Rams on Edeelo.com, We Offer home delivery all over Pakistan.
Kingston KVR16N11S8/4 1600 MHz DIMM 240-Pin DDR3 RAM – 4GB
This document describes ValueRAM’s 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA componen ts. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
VDDQ = 1.5V (1.425V ~ 1.575V)
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
PCB : Height 0.740” (18.75mm) or 1.180” (30.00mm)
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. Edeelo cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.
Only logged in customers who have purchased this product may leave a review.